AT&T Syn248 SB35020, Installation And Configuration Manual

Page: 74 / 116

Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 73
Gateway Front Panel Interface
You can access basic information and perform some configuration tasks using the
Gateway’s front panel. Most of these tasks are easier to do using the WebUI. See
“Logging in to the WebUI” on page 27 .
The Gateway displays the Idle screen after completing the power-up sequence. Use the
Gateway Main menu to perform some system operations.
To access the Gateway Main menu from the Idle screen, as shown in Figure 18, press the
SELECT key.
Figure 18. Gateway Idle Screen
From the Main menu you can access
Device Information
,
Network Status
, and the
Configuration
menu.
Figure 19. Gateway Menu Screens
Press the DOWN key to highlight an entry, then press SELECT to see information about
your Gateway or your Network.
On the
Device Information
screen, you can view:
On the
Network Status
screen, you can view:
Select
Configuration
to view or modify some Gateway settings. See “Gateway
Configuration” on page 74 .
Press CANCEL to return to the Main Menu.

Model #

Serial #

Boot Version

Software Version

Firmware Version.

IP Address

Subnet Mask

Default Gateway

DNS Server x

MAC Address

Network Port

Local Address.
30)(%
3671/LQHV
6\QFKURQL]HG
,3
D HYLFH,QIRUPDWLRQ
N HWZRUN6WDWXV
Configuration