YES
NO
FIGURE 5
FIGURE 6
1
2
FIGURE 7
FIGURE 8
1
Maintenance Hint for Optimum Performance
Replace the Versatip every 6 months or sooner if it hardens,
shrinks, tears, cracks or becomes misshapen.
Clean the Versatip daily with a cloth dampened with warm
water; do not use cleaning solvents as they may damage the
Versatip or cause skin irritation.
Adjusting the Voice Tube
With one hand, hold the capsule securely against your head.
With your other hand, pull out or push in the voice tube and
rotate the tip so it is approximately 1/2” away from your face
at the corner of your mouth. (Refer to
F I G U R E
6 )
Maintenance Hint for Optimum Performance
Replace your voice tube every six months.
Attaching StarSet
®
to Glasses
StarSet is designed to fit comfortably with glasses. If you
desire a more secure fit, use the Eyeglass Clip. Attach the clip
to the side that you wear your headset.
A For plastic frames, slip the clip onto the temple of your
glasses with the grips for the headset facing away from
your head. (Refer to
F I G U R E
7 A )
B For metal or wire frames, pull back the tab on top of the
clip. Then, slip the clip onto the temple of your glasses
with the grips for the headset facing away from your
head. The clip should be secure when the tab is released.
(Refer to
FIGURE
7B)
Attach the headset by slipping the voice tube balljoint into the
clip. (Refer to
FIGURE
7B)
Quick Disconnect
Your headset model is equipped with a Quick Disconnect
module. This feature allows you to place a call on hold with-
out removing your headset, thus freeing you to perform a task
away from the phone. Your conversation is quickly resumed
by reconnecting the Quick Disconnect.
Before attempting to use your headset, be sure that the two
Quick Disconnect halves are connected.
3
