Page 7
Operational Instructions
Charging Your SPB3200 Battery Case
- Using the included USB to micro-USB cable, plug the micro-USB
connector into the micro-USB input jack on the bottom of your
SPB3200.
- Plug the USB cable into any USB powered device, such as a
personal computer, USB wall adapter or USB enabled battery pack.
- Upon initial use, or after a prolonged storage period, the SPB3200
should be fully charged in approximately 4 hours.
Note: The case will charge when connected to the USB power source even when there is no phone
inserted into the SPB3200 Battery Case.
Checking the Battery Case Power Level
- Press the Power ON/OFF button and the blue LED lights will
illuminate. The battery case is fully charged when all four LED is
light up.
LED Power Indicator Chart
Status
Power indicator
0-25%
•
25-50%
• •
50-75%
• • •
75-100%
• • • •
