51
Appendix
System announc-
es
“Time and day
not set”
• You need to reset the answering system clock (see page 33).
System does not
respond to remote
commands
• Make sure to enter your remote access code correctly (see
page 40).
• Make sure you are calling from a touch-tone phone. When
you dial a number, you should hear tones. If you hear clicks,
the phone is not a touch-tone telephone and cannot acti-
vate the answering system.
• The answering system may not detect the remote access
code while your announcement is playing. Try waiting until
the announcement is over before entering the code.
• There may be noise or interference on the phone line you
are using. Press dial pad keys firmly.
System does
not record
message
• Make sure answering system is on (see page 39).
• Make sure the memory of the answering system is not
full.
Outgoing
announcement is
not clear
• When you record your announcement, make sure you speak in a
normal tone of voice, about nine inches from the telephone
base.
• Make sure there is no background noise (TV, music, etc.) while
you are recording.
Troubleshooting
