AT&T PLUG&SHARE 6602G Page 37 User Manual Download

Page: 37 / 38

Technical Specifications

AT&T Plug&Share

™

Wireless USB Adapter 54 Mbps 6602G

Standards

• IEEE 802.11
• IEEE 802.11b
• IEEE 802.11g

Operating Systems

• Windows

98SE, Me, 2000 or XP

Interface

• USB 1.1/2.0

Wireless Data Rates

With Automatic Fallback
• 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps

Encryption

• 64/128-bit RC4

Media Access Control

• CSMA/CA with ACK

Frequency Range

• 2.4GHz to 2.472GHz

Operating Range

• Indoors: Up to 300 feet (100m)
• Outdoors: Up to 980 feet (300m)

Modulation Technology

• OFDM (Orthogonal Frequency Division

Multiplexing

Modulation Techniques

• Barker (1 Mbps)
• Barker (2 Mbps)
• CCK (5.5 Mbps)
• OFDM (6 Mbps)
• OFDM (9 Mbps)
• CCK (11 Mbps)
• OFDM (12 Mbps)
• OFDM (18 Mbps)
• OFDM (24 Mbps)
• OFDM (36 Mbps)
• OFDM (48 Mbps)
• OFDM (54 Mbps)

Transmitter Output Power

• 15dBm ± 2dB

Internal Antenna Type

• Diversity

LED

• Power/TX/RX

Operating Climate Range

• Temperature: 32° to 131°F (0° to 55°C)
• Humidity: 15% to 90% relative humidity

Storage Climate Range

• Temperature: -40° to 150°F (-40° to 66°C)
• Humidity: 15% to 90% relative humidity

Safety & Emissions

• FCC

Technical Specifications

Care and maintenance

Always unplug this product before cleaning. Use a damp cloth to clean the exterior housing only. Do not
use liquid cleaners or aerosol cleaners.

Periodically visit our web site to check for free driver upgrades that can help maximize the performance
and reliability of your wireless network:

www.plugandshare.att.com

Summary of Contents for PLUG&SHARE 6602G







































Search results

Summary of Contents for PLUG&SHARE 6602G

Reviews:

Related manuals for PLUG&SHARE 6602G

Brands by name

Popular brands

AT&T PLUG&SHARE 6602G, User Manual

Search results

Summary of Contents for PLUG&SHARE 6602G

Reviews:

Related manuals for PLUG&SHARE 6602G

Brands by name

Popular brands