AT&T OneVision DEFINITY G3 Guide, Installation And Connection Manual

Page: 215 / 287

Issue 2 April 1996
10-7
Alarms
Program the Alarm Receiver Port
Procedure 4:
Enter port
services
data, page 1 Enter the Port Services data exactly as shown on page 1 of the
following screen.
If your serial port is not tty00, substitute the port’s name for the
entry in the Service tag field. Leave the two optional fields in this
example blank.
When you finish, complete the following steps:
Add Port Services to Port Monitor alrmrcvr Page 1 of 2
Service tag: tty00
Identification & authentication scheme: login
Service invocation identity:
Port/service state: DISABLED
utmp entry to be created for this service? Yes
Version number: 2
File name of the port service configuration script:
Comments: Alarm receiver port-must be disabled
Step Action
1 Press
F3
to save your work.
2 Go to Procedure 5: Enter port services data, page 2.