AT&T OneVision DEFINITY G3 Guide, Installation And Connection Manual

Page: 216 / 287

10-8 Issue 2 April 1996
Alarms
Program the Alarm Receiver Port
Procedure 5:
Enter port
services
data, page 2 The following Ad d Port Services to Port Monitor alrmrcvr screen
shows your field entries for page 2:
If your serial port is not tty00, substitute the port’s name for the
entry in the Name of TTY device field. When you finish, complete
the following steps.
Add Port Services to Port Monitor alrmrcvr Page 2 of 2
Name of TTY device: /dev/tty00
ttylabel: 1200
Service command: /usr/bin/shserv
TTY line options:
Hangup: Yes
Connect-on-carrier: No
Bidirectiona1: Yes Wait-Read: Yes
Timeout: O
Prompt message: login
(Optional fields)
Modules to be pushed: ldterm
Step Action
1 Press
F3
to save your work.
2 Press
F7
to access the Command menu.
3 Select
exit
to return to the shell prompt.
End