AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual Download

Page: 153 / 287

Issue 2 April 1996

7-5

Serial I/O Cards
DigiBoard Xem

Procedure 3:
Test the
installation

Start at the DigiWare Main Menu.

Fill in this screen according to your configuration. Our
suggested entries are:

Adapter Type:

Digi_Xem_(ISA)

I/O Address:

Dx204

Memory Address:

0x000D0000

TTY ID Select:

Auto

Number of PORTS:

Config Status:

Yes

Navigate through the screens until the Module
Configuration window displays.

Does the PORTS Module1 field equal

PORTS 8em

■

If yes, go to step 6.

■

If no, make sure your hardware is installed and the
cable between the ports card and the breakout box
is properly connected. Then go to step 6.

Follow the screen prompts until the configuration is
complete. Then go to Procedure 3: Test the installation.

Step

Action

Step

Action

Navigate through the screens until the Monitor - Digi
Port Authority window displays.

Summary of Contents for OneVision DEFINITY G3 Guide
































































































































































































































































































Search results

Summary of Contents for OneVision DEFINITY G3 Guide

Reviews:

Related manuals for OneVision DEFINITY G3 Guide

Brands by name

Popular brands

AT&T OneVision DEFINITY G3 Guide, Installation And Connection Manual

Search results

Summary of Contents for OneVision DEFINITY G3 Guide

Reviews:

Related manuals for OneVision DEFINITY G3 Guide

Brands by name

Popular brands