AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 706 / 887

Memory Card
4–334
Programming Procedures
Format Warning
Format Memory Card:
All data on card will be
DELETED.
Do you want to continue?
_
Yes
_
No
_
Exit
This screen appears if you respond to the system prompt to format the memory
card.
Select
Yes
(or press
3
) to begin the memory card format. Table 4–8 lists the
screen messages that may appear while formatting is in progress.
Table 4–8. Memory Card Formatting Messages
Message What it Means
Formatting Memory Card
The format is in progress.
Formatting of Memory
Card Completed.
The format was successful and has
completed.
Memory Card cannot be
formatted.
The memory card cannot be formatted. Remove
the card and repeat the procedure with another
card.
Formatting of Memory
Card FAILED.
The format was unsuccessful. Remove the card
and repeat the procedure with another card.
Missing Card or Card Not
Inserted Correctly
Verify that the card is inserted correctly and
repeat the procedure.
If Home or Menu are pressed during a format procedure, the format is
terminated. The data on the memory card may be lost. See Chapter 1,
“Programming Basics”, for detail about these keys.
Backup
Use this procedure to make a copy of your customized system data. You should
create a backup at least three times during system installation (so that
programmed information is not lost), and once after each system upgrade,
service technician visit, or major system reconfiguration.