AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 480 / 887

Tie Trunks
4–108
Programming Procedures
Tie Trunk Answer Supervision Time
Use this procedure to specify the tie trunk answer supervision time in
milliseconds. This is the time limit for the called system to respond.
Summary: Tie Trunk Answer Supervision Time
Programmable by System manager
Mode All
Idle Condition Not required
Planning Form Form 3c, Incoming Trunks: Tie
Factory Setting 300 ms
Valid Entries 20 to 4800 ms, in increments of 20 ms
Inspect No
Copy Option Yes
Console Procedure
LinesTrunks
®
TIE Lines
®
AnsSupvr
®
Dial trunk no.
®
Enter
®
Drop
®
Dial no. of ms
®
Enter
®
Exit
®
Exit
PC Procedure
4
®
2
®
9
®
Type trunk no.
®
0
®
A
+
P
®
Type
no. of ms
®
0
®
5
®
5
Procedure: Tie Trunk Answer Supervision Time
Console Display/Instructions Additional Information PC
1 Select the Lines and Trunks menu.
System Programming: >
Make a selection
System
Extensions
SysRenumber Options
Operator Tables
_
LinesTrunks AuxEquip
Exit NightSrvce
4
2 Select Tie Lines.
Lines and Trunks: >
Make a selection
LS/GS/DS1
PRI
_
TIE Lines Copy
TT/LS Disc RemoteAccss
DID Pools
Exit Toll Type
2