AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 202 / 887

Telephones
3–66
Common Administrative Procedures
Console Display/Instructions Additional Information PC
3 Enter the logical ID of the first extension number in the block to be copied to.
Copy extension xxxx
xxxx = extension entered in Step 4 of the
Enter starting extension
main procedure
logical id (#1 - #200)
Backspace
Exit
Enter
Dial or type
#
[ nnn ].
Û
4 Save your entry.
Select
Enter Enter
.
0
5 Enter the logical ID of the last extension number in the block to be copied to.
Start at extension xxxx
xxxx = extension number of logical id
Enter ending extension
entered in Step 1
logical id (#1 - #200)
Backspace
Exit
Enter
Dial or type
#
[ nnn ].
Û
6 Save your entry.
Select
Enter Enter
.
0
7 Return to the System Programming menu.
Select
Exit Exit
two times.
55
Assign Intercom or System Access Buttons
Use this procedure to assign or change the assignments for Intercom ( ICOM)
buttons used to make and receive inside calls. This includes the following types
of Intercom buttons:
■
Ring
■
Voice
■
Originate Only (Ring or Voice)
In Hybrid/PBX mode only, use this procedure to assign or change assignments
for System Access (
SA ) buttons used to make or receive inside and outside
calls. This procedure includes the following types of System Access buttons:
■
Ring
■
Voice
■
Originate Only (Ring or Voice)
■
Shared (Ring or Voice)