manualshive.com logo in svg

AT&T Merlin II Feature Module 2, System Manual

The AT&T Merlin II Feature Module 2 System Manual is available for free download at manualshive.com. This comprehensive manual provides detailed instructions and information on how to maximize the features and functionality of the Merlin II Feature Module 2. Get your manual now and unlock the potential of your AT&T Merlin II system.

Share
Download
background image

Monitoring Call Management

Once you  begin call management (as described earlier in “Startup
Procedures“), you can monitor activity in the line groups and splits through
the status screens. These screens, described in this chapter, are as follows:

●    

System Status screen. This  screen  is considered the “home” screen during

call management. It summarizes the activity in each line group and split.

●   

Split Status screens.

You can view a Split Status screen for each split.

This screen describes the activity of each agent in a particular split and
summarizes the activity for the entire split.

●   

Line Status screen. 

This screen summarizes the activity for each line and

line group.

●   

Events Log screen.

This screen lists the 19 most recent exception

messages and system problems and the time they occurred.

By monitoring the status screens, you can discover problems as they occur
and correct them through dynamic reconfiguration. (See “Dynamic
Reconfiguration.”)

To print a copy of any screen, press 

[ ^ ] 

- 

[ Prt Sc ]  

while the screen is

displayed.

NOTE: 

If you see the message Don’tPrtSc  on the ID line or Printer Not

Ready. Using Prt Sc Key will Halt CMS 

on the error line, do not attempt to

print a screen. If you attempt to print a screen while either of these
messages is displayed, CMS will stop running,

If the printer is not ready, you can perform the following checks:

Make sure the printer is plugged in and turned on. The Ready light
should be on.

Make sure there is paper in the printer and that it is aligned properly and
not jammed.

Press the Form Feed button on the printer to make sure the paper feeds
properly.

Turn to “Printer Problems” in Section 9, “Troubleshooting,” for more
information about troubleshooting your printer.

Using the System Status Screen

The System Status screen, shown below, summarizes the activity in each line
group and agent split. It is considered the “home” screen during call
management. For an explanation of the data on this screen, see “Key to

System Status Data.”

Monitoring Call Management

5-15

Summary of Contents for Merlin II Feature Module 2

































































































































































































































Reviews:

No comments

Related manuals for Merlin II Feature Module 2

Uniden D1680-4XTA Manual D'Utilisation preview
D1680-4XTA
Brand: Uniden Pages: 27
American Audio Lab GO-210 TUTTI User Manual preview
GO-210 TUTTI
Brand: American Audio Lab Pages: 31
Roadpost Swiss oneRoam International Cellular User Manual preview
Swiss oneRoam International Cellular
Brand: Roadpost Pages: 11
Fender PASSPORT P-80 Owner'S Manual preview
PASSPORT P-80
Brand: Fender Pages: 51
Nortel Compact ICS 7.1 Coordinator Manual preview
Compact ICS 7.1
Brand: Nortel Pages: 266
2N StarPoint 500 User Manual preview
StarPoint 500
Brand: 2N Pages: 32
BELGACOM Forum phone 320 User Manual preview
Forum phone 320
Brand: BELGACOM Pages: 37
Hitachi AX-M79 Service Manual preview
AX-M79
Brand: Hitachi Pages: 44
Motorola T505 - MOTOROKR - Speaker Phone User Manual preview
T505 - MOTOROKR - Speaker Phone
Brand: Motorola Pages: 108
Motorola T2282 Service Manual preview
T2282
Brand: Motorola Pages: 56
Motorola MOTO MT680 User Manual preview
MOTO MT680
Brand: Motorola Pages: 37
Motorola Ojo User Manual preview
Ojo
Brand: Motorola Pages: 50
Motorola PMLN6481 User Manual preview
PMLN6481
Brand: Motorola Pages: 66
Motorola K1C Motomanual preview
K1C
Brand: Motorola Pages: 107
Motorola T8160 Manual preview
T8160
Brand: Motorola Pages: 143
Motorola T2282 Quick Reference preview
T2282
Brand: Motorola Pages: 88
Motorola T6NL1 User Manual preview
T6NL1
Brand: Motorola Pages: 96
Motorola V150 User Manual preview
V150
Brand: Motorola Pages: 155

Brands by name

Popular brands

Load more brands