manualshive.com logo in svg

AT&T HS-8270, User Manual, Page: 23 / 52

Share
Download
AT&T HS-8270 User Manual Download Page 23

Changing Channels

This cordless telephone has an advanced AutoSelect feature that minimizes
the chance of interference. When the phone is looking for a clear channel,
the screen displays 

SEARCHING...

. If it is unable to locate a clear channel,

the screen displays 

TRY AGAIN

. Hang up and try your call again.

In the unlikely event that you notice noise or interference while using 
the handset:

1

Press 

L

.

2

If the interference does not clear, move closer to the base and
press 

L

again until you find a clear channel (your call will

not be interrupted).

NOTE: 

You must be within range of the base to change channels (see

the OPERATING RANGE section of this manual).

Headset Jack

You can use this telephone hands-free when you install the AT&T 2.5 mm
headset.

1

Plug the headset into the jack located on the left side of the handset.
Do not force the connection, but make sure the plug fits securely.

2

Follow the instructions under “Make,Answer, or End a Call” on
page 19.

3

If you wish, attach the belt clip (see page 5 in the INSTALLATION
section of this manual).

NOTE:  

The earpiece and microphone on the handset are disabled when

the headset is plugged in.

TELEPHONE OPERATION

AT THE HANDSET

22

L2

L1

Summary of Contents for HS-8270





















































Reviews:

No comments