Installation and setup
After battery installation, place each handset in the telephone base or a charger and
allow it to charge for sixteen hours before use. You can keep the battery packs charged
by returning the handsets to the telephone base or chargers after each use. When the
battery is fully depleted, a recharge takes about sixteen hours. The average talk time on a
fully charged battery is about eight hours depending on environmental conditions, and the
standby time is approximately four days.
Plug the battery
pack connector
into handset.
Place handset in base or charger
to charge for sixteen hours before
first use.
Caution:
Use only the supplied rechargeable battery or replacement battery pack (part number 80-5848-00-00).
Press in and downward on the
tab to open the battery com-
partment cover.
Slide battery compart-
ment cover up until it
clicks closed.
NOTE:
Use only the power adapter supplied with this product. If you need a replacement, call 1 (800) 222-3111. In
Canada, call 1 (866) 288-4268. Be sure to use an electrical outlet not controlled by a wall switch.
Place the battery
pack and wires in
the compartment.
Plug the power
adapter into an
electrical outlet not
controlled by a wall
switch.
Plug telephone
line cord into tele-
phone jack.
