Priority Calling
To place a priority call
(3-burst ring)
1
Press [
Priority
]
or Dial Priority Calling Code
[dial tone]
2
Dial extension
Note:
If your call is not answered and you wish to
redirect it to coverage, press [
Go to Cover
] while call is
ringing.
To send the priority call
waiting tone (3-burst)
when you hear a call
waiting ringback tone
1
2
Press [
Priority
]
Wait for called party to answer
Note:
If you still receive a call waiting ringback
tone, wait a few minutes and try again.
Select Ring
✔
To select a personalized
ring
1
2
Press [
Calculator/Select Ring
]
●
Green light comes on
Press [
PR
]
●
●
Green light flashes; current ring pattern plays
and repeats every 4 seconds
Display shows [
PERSONAL RING x
] (x will be a
number from 1 to 8)
3
4
5
Adjust ringer volume with volume sliding switch on
left underside of voice terminal, if desired
Repeat Step 2 to cycle through all 8 ring patterns
Press [
Select Ring
] again when you hear the desired
ring pattern
●
Your new ring is set; green light goes off
Note:
If you receive a call during selection,
process is interrupted and you must begin again.
16
