Connect to the Internet
1. Turn on your mobile hotspot by pressing and
holding the Power/Navigation button for
3 seconds.
2. Open the Wi-Fi network manager on your
computer, smartphone, tablet, or Wi-Fi enabled
device.
3. Find and select your mobile hotspot’s Wi-Fi
network (SSID) named
“hotspot_XXXX”
for the
2.4GHz Wi-Fi network or
“hotspot_XXXX_5GHz”
for the 5GHz Wi-Fi network.
4. Connect by entering the password (key) shown
on your mobile hotspot’s display.
2.4GHz network
name (SSID) and
password (KEY)
5GHz network
name (SSID) and
password (KEY)
5. Open a web browser and visit your favorite
website to confirm your connection.
Note: Wi-Fi network name (SSID) and Wi-Fi
network password (key) can be changed in the
online WebUI under Wi-Fi Basic Setting.
Reading Messages
The message icon on the Home Screen will
indicate when a new message is received.
1. Press the Power/Navigation button from the
Home Screen to scroll to the Message Screen.
2. The highlighted message will automatically scroll
left to right to display the entire contents of the
message.
3. Press the Power/Navigation to switch to the next
message.
4. You can delete saved messages in the online
WebUI Manager.
Note: When there are no unread messages, the
Message Screen will not appear on the hotspot.
WPS Button
Connect securely without having to manually input
the Wi-Fi password (key).
1. Open the Wi-Fi network manager on your
computer, smartphone, tablet,or Wi-Fi enabled
device.
2. Find your mobile hotspot’s Wi-Fi network (SSID)
named
“hotspot_XXXX”
for the 2.4GHz Wi-Fi
network or
“hotspot_XXXX_5GHz”
for the 5GHz
Wi-Fi network.
3. Activate the WPS connection on your device.
4. Press the WPS button on the hotspot and wait a
moment until your device is connected to the
network.
5.
“WPS Success”
will be displayed on the hotspot
to confirm connection.
Display Layout and Icons
1. Press and hold the Power/Navigation button for
3 seconds.
Blocking Devices
Block unwanted devices from connecting to your
mobile hotspot.
1. Log in to online WebUI Manager.
2. Select
Security > MAC Filter
.
3. Select
blacklist
or
whitelist mode
.
4. Click “Add New Rule”then input a MAC address
to add a new whitelist or blacklist rule.
5. Click
Save
.
Website Filter/
Configuration
Block your device from connecting to unwanted
websites while connected to your mobile hotspot.
1. Log in to online WebUI Manager.
2. Select
Security > Website filter
.
3. Select
blacklist
or
whitelist mode
.
4. Click
“Add New Rule”
then input a Website Filter
to add a new whitelist or blacklist rule.
5. Click
Save
.
Set Up Your Mobile Hotspot
1. Remove back cover, and take the battery out.
2. Remove the SIM card from the outer card.
3. Locate the SIM card slot. Hold SIM so that the
cut corner is at the top and gold contacts are
facing downward. Insert SIM by pressing down
on the clip and sliding into the SIM slot.
4. Insert the battery. Install the back cover, the
arrow on the back cover points downward.
5. Charge mobile hotspot fully.
Removing Your SIM Card
1. Remove back cover, and take the battery out.
2. Locate the SIM card slot.
3. Push down on the plastic clip in front of the SIM
card, while sliding the SIM card out of its slot.
Wi-Fi Options
1. Log in to the online WebUI Manager.
2. Select
Wi-Fi > Wi-Fi Basic Settings
.
3. Select
2.4GHz only, 5GHz only, or Dual-Band
2.4GHz & 5GHz
.
4. Click
Save
.
Parental Control
Limit the websites certain Wi-Fi enabled devices are
able to connect to and the times they are allowed
to connect.
1. Log in to online WebUI Manager.
2. Select
Security > Parent Control
.
3. Click the
Add New Rule button
to enable Parent
Control.
4. Enter the content as required.
5. Click
Save
.
Get to Know Your Mobile
Hotspot
Online WebUI Manager
Access the online WebUI to manage your mobile
hotspot’s settings, features and controls.
1. Open a web browser on a computer or Wi-Fi
enabled device that is connected to the mobile
hotspot’s Wi-Fi network. Make sure your device is
already connected to the mobile hotspot’s Wi-Fi
network.
2. Enter
http://192.168.1.1 (or http://hotspot.webui)
in the address bar of the browser.
3. Enter WebUI password and select
Login
. The
admin password for the online WebUI is the
last
8-digits of the IMEI code
, which is printed on the
device label (underneath the battery). IMEI code
is also listed on the Device Details screen of your
device.
Note: Admin password (last 8 digits of IMEI)
can be changed in the online WebUI under
System>Administrator.
Mobile Hotspot LCD Screens
Press the Power/Navigation button to scroll through
the screens.
Power /
Navigation
button
Quick Start Guide
Turbo Hotspot 2
DOC20200701
LCD home
screen
WPS button
Battery
back cover
Factory
reset hole
USB
Type C
Charging
Port
Note: To perform a factory reset, insert a narrow
object, such as a paperclip, into factory reset
hole (on the bottom of the device), then push
in and hold for 6 seconds. When you turn on the
device, it will be restored to the default factory
settings.
Warning: To avoid any damage to your device,
only use the standard micro-SIM card provided.
Note: Display screen will timeout after 1 minute
of inactivity to save power. Press the Power/
Navigation button to wake the screen. This default
setting can be adjusted in the online WebUI.
Network indicator
Password (Key) for Wi-
Fi Network
Battery indicator
Signal strength
New message
notification
Wi-Fi network
name (SSID)
Number of
connected
devices
Note: The Message Screen will only appear when
there is an unread message on your device.
Home Screen
Message Screen
Wi-Fi Info Screen
Device Details Screen
