AT&T CL84107 Complete User'S Manual Download

Page: 83 / 160

Smart call blocker

About Smart call blocker*

If you have subscribed to caller ID service, then you can use Smart call blocker to

filter robocalls, telemarketing calls and unwanted calls, while allowing welcome

calls to get through.
You can set up your lists of welcome callers and unwelcome callers. Smart call

blocker allows calls from your welcome callers to get through, and it blocks

calls from your unwelcome callers.
For other unknown calls, you can allow these calls, block these calls, or forward

these calls to the answering system.

With some easy configurations, you can set to only filter robocalls by asking the

callers to press the pound key (

) before the calls are put through to you.

You can also set Smart call blocker to screen incoming calls by asking the

callers to record their names and press the pound key (

). After your caller

completes the request, your telephone rings and announces the caller’s name.

You can then choose to block or answer the call, or you can forward the call to

the answering system. If the caller does not respond or record his/her name,

the call is blocked from ringing through. When you add your welcome callers to

your allow list, they will bypass all screening and ring directly to your handsets.

Notes:

Smart call blocker is on, once you install your telephone. It allows all incoming calls to get through and ring by default.

You can change the Smart call blocker settings to screen incoming calls. For more details, see

Control calls without

numbers

on page 80 and

Control uncategorized calls

on page 81.

With call screening active, Smart call blocker screens and filters all incoming calls from numbers or names that are not yet

saved in your directory, allow list, block list, or star name list. You can easily add incoming phone numbers to your allow

list and block list. This allows you to build up your lists of allowed and blocked numbers, and Smart call blocker will know

how to deal with these calls when they come in again.

To turn off Smart call blocker, see

Set Smart call blocker on/off

on page 80.

Includes licenced Qaltel

technology.

Qaltel

is a trademark of Truecall Group Limited.

Summary of Contents for CL84107

































































































































































Search results

Summary of Contents for CL84107

Reviews:

Related manuals for CL84107

Brands by name

Popular brands

AT&T CL84107, Complete User'S Manual

Search results

Summary of Contents for CL84107

Reviews:

Related manuals for CL84107

Brands by name

Popular brands