Multiple handset use
25
Intercom
Use the intercom feature for conversations between handsets. This feature is
not available for model CL82109 unless you have purchased additional
handsets (CL80109).
You can buy additional expansion handsets (model AT&T CL80109) for this
telephone base. You can register up to 12 handsets to the telephone base.
The first nine handsets that you register are named Handsets 1-9. Use the
handset number to initiate intercom and transfer calls.
Although the names for handsets 10-12 appears in their displays as 10-12,
when you intercom or transfer to one of them, you must use
*0
for Handset
10,
*1
for handset 11, and
*2
for Handset 12.
1. Press
INT
on your handset when not in use.
• If you have a two-handset system, your handset
screen shows
CALLING OTHER HANDSET
.
• If you have more than two handsets, your screen
shows
INTERCOM TO:
Use the dialing keys to
select the other handset. Your handset screen
shows
CALLING HANDSET X
.
The other handset rings and its screen shows either
OTHER
HANDSET IS CALLING
or
HANDSET X IS CALLING
.
2. To answer the intercom call, press
PHONE/FLASH
,
INT
, or any dial pad keys (0-9, #, *) on the other handset.
Both handsets now show
INTERCOM
.
3. To end an intercom call, press
INT
,
OFF/
CLEAR
, or
place the handset back in the telephone base or charger.
NOTES:
1. Before the intercom call is answered, you can cancel the intercom call by pressing
OFF/CLEAR
or
INT
on the calling handset.
2. If the called handset is not answered within 100 seconds, or if it is in the directory
or call log mode, or is out of range, the calling handset shows the message
UNABLE TO CALL TRY AGAIN
.
3. Pressing
OFF/
CLEAR
or
MUTE/
DELETE
temporarily silences the intercom ringer.
4. You can use a maximum of four handsets at a time. When you use two handsets on
an intercom call, others can use two other system handsets for an outside call.
DBMMJOH
PUIFS!IBOETFU
PUIFS!IBOETFU
JT!DBMMJOH
JOUFSDPN
