Adding and registering handsets
3. The screen shows
Registering... Please wait
and the
IN USE
light turns on. It takes up to 90
seconds to complete registration. Then,
HANDSET X Registered
appears on the screen,
with
HANDSET
being the handset name and
X
being the handset number (
1
-
12
)
.
The handset
beeps and the
IN USE
light turns off. The handset
is now registered with the telephone base.
If registration fails, the system will automatically try
to register again. If registration fails after the third try,
Registration failed
appears on the screen for a few
seconds. This may take up to five minutes to occur.
Please start again from Step 1.
NOTES:
You cannot register a handset if any other system handset is in use.
To reset the telephone, unplug the power from the telephone base and the battery
from the handset, then plug them back in.
•
•
Registering...
Please wait
HANDSET X
Registered
9
Registration and deregistration
