Registration and deregistration
11
Register a handset to your telephone base for AT&T models
CL82107/CL82207/CL82257/CL82267/CL82307/CL82357/CL82367/
CL82407/CL82467/CL82507/CL82547/CL82557/CL83107/CL83207/
CL83307/CL83407
1. Before you begin registration, make sure the handset is out of the
telephone base or charger and shows
To register HS, see manual
.
2.
Put the handset you wish to register on the telephone base cradle.
3. The
IN USE
light on the telephone base turns on. The handset
shows
Registering... Please wait
.
When the registration is
successful,
the handset shows
HANDSET X Registered
(
HANDSET
represents the handset name,
X
represents the handset number)
and you hear a confirmation tone.
The
IN USE
light turns off. The
handset is now registered with the telephone base.
If the registration fails, the system will automatically try to register
again. If registration fails after the third try,
Registration
Failed
appears on both screens. The handset shows
To register HS,
see
manual
and the telephone base returns to idle mode. This may
take up to five minutes to occur. Please start again from Step 1.
Notes:
f
You cannot register a handset if any other system handset is in use.
f
You can only register one handset to the telephone base at a time.
Adding and registering handsets
For registration, put the handset on the
telephone base, not the handset charger.
