1
2
FIGURE 7
3
4
FIGURE 8
FIGURE 9
1
2
FIGURE 10
Placing and Receiving Calls with the Modular Amplifier
For headset use, depress the middle button labeled
"ON/OFF" so that the color indicator is visible.
(FIGURE 7)
To place a call, remove the telephone handset from its cradle.
You should hear a dial tone. Dial normally. To end the call,
hang up the handset.
To receive a call, remove the handset from its cradle. You can
now hear and be heard by the calling party. To end the call,
hang up the handset.
For handset use, depress the "ON/OFF" (middle) button again
so that the color indicator does not appear. Pick up your handset
as you would normally.
Setting the Volume Control
To set the volume control to the hearing level most
comfortable for you, start with the wheel turned to number 1,
the lowest level. To increase the volume, rotate the wheel to
a higher number.
(FIGURE 8 or 9, as appropriate.)
Using the Mute Button on the Modular Amplifier
To mute your voice while still hearing the caller, depress the
MUTE (right) button so that the color indicator is visible.
(FIGURE 10)
To resume speaking to your caller, depress the MUTE (right)
button again so that the color indicator does not appear.
IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT
THE AT&T HELPLINE AT 1-800-628-2888.
4
PRINTED IN THE U.S.A.
27302-01(© 4/92)
