background image

O P E R A T I N G   R A N G E

This cordless telephone operates within the maximum
power allowed by the Federal Communications Commission
(FCC). Even so, this handset and base can communicate
over only a certain distance — which can vary with the
locations of the base and handset, the weather, and the
construction of your home or office. For best performance,
keep the base antenna fully upright.

If you receive a call while you are out of range,

the

handset might not ring — or if it does ring, the call might
not connect when you press 

P

. Move closer to the

base, then press 

P

to answer the call.

If you move out of range during a phone
conversation,

you might hear noise or interference. To

improve reception, move closer to the base.

If you move out of range without pressing 

O

, your

phone will be left “off the hook.” To hang up properly, walk
back into range, periodically pressing 

O

.

900 MHz 
Cordless Telephone 9320/8220

Fold open this manual for information about this 
telephone’s installation and operation. Please 
also read 

Part 1 — Important Product Information.

AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.

© 2001 Advanced American Telephones. All rights reserved.

Printed in China.

Issue 1AT&T  05/01

USER’S MANUAL 

Part 2

REVISED

5/17/01

Summary of Contents for 9320/8220









Reviews: