2
F E A T U R E S E T U P
Feature Setup
1
To enter Feature Setup mode, press
and hold
S
until the system
announces “
Number of rings.
”
2
Press and release
S
until the
system announces the feature you
want to set.
3
Press and release
or
until the system announces the setting
you want. Refer to the Feature
Summary for options.
4
Press and release
S
to set up the
next feature listed on the Feature
Summary
— OR —
Press and release
P
to exit
Feature Setup.
The new settings will be saved.
Feature Summary
Feature/System Announces
Options
Announce Select
Choose from Announcement A or Announce Only.
“Selected announcement is...”
•
Select “Announcement A” when you want the
system to record callers’ messages. Select
“Announce Only” when you want the system to
play an announcement and then hang up.
•
If you select “Announcement A” and do not record
an announcement, the system plays a pre-recorded
announcement:
“Hello. Please leave a message
after the tone.”
•
If you select “Announce Only” and do not record
an announcement, the system will answer after 10
rings and announce “
No announcement.
”
See “Record Your Announcement” under OPERATION
for recording instructions.
Ring Select
Choose how many times the line will ring before the
system answers a call.
“Number of rings is...”
•
Set for 2 to 7 rings, or choose Toll Saver 2/4 or Toll
Saver 4/6.
•
When set to Toll Saver 2/4, the system answers
after four rings when you have no new messages
and after two rings when you do. Toll Saver 4/6
causes the system to answer after six rings when
you have no new messages and after four rings
when you do.