© 1998 Philips Consumer Communications L.P. All rights reserved.
Printed in China. 848230090 Issue 1AT&T
From a Remote Touch Tone Phone
To connect with your answering system:
1
Dial your telephone number from a touch tone phone.
2
When the system answers, press
*
*
during the
announcement, then enter your four-digit Remote Access Code.
The system beeps once, then begins playing messages.
3
After playing messages, the system sounds a two-beep signal to
let you know it is ready to accept a remote command.
Answering System 1305
2
© 1998 Philips Consumer Communications L.P. All rights reserved.
Printed in China. 848230090 Issue 1AT&T
From a Remote Touch Tone Phone
To connect with your answering system:
1
Dial your telephone number from a touch tone phone.
2
When the system answers, press
*
*
during the
announcement, then enter your four-digit Remote Access Code.
The system beeps once, then begins playing messages.
3
After playing messages, the system sounds a two-beep signal to
let you know it is ready to accept a remote command.
Answering System 1305
2
