ATake Digital Technology ShenZhen Co., Ltd.
Wireless Optical Mouse User Manual
(Rechargeable)
ATake Co., Ltd.
♦
7F., No. 123, Li-de Street, Jhonghe City, Taipei Country 235, Taiwan
♦
WWW.ATAKE.COM
886 2 2221 4999
♦
- 4 -
4. Sleep Mode
The mouse will switch to power saving mode after 3 seconds while working; and powered off
automatically in 8 minutes to extend battery life. The mouse will be activated again with one mouse click.
Note on handling batteries
z
Keep batteries out of children’s reach.
z
Do not mix old and new batteries or use different types of battery.
z
Replace old or weak batteries promptly.
z
Always use rechargeable batteries only.
The charge unit will not charge the mouse with alkaline
batteries and
alkaline batteries can cause damage to the mouse
.
z
This device needs two AAA 1.2V 600mA NIMH Re-chargeable batteries.
z
Dispose of and recycle your old batteries in accordance with local regulations.
z
The equipment is to be supplied from an identified USB port complying with the requirements of
Limited Power Source
Operating Hints
For optimal performance and RF reception:
z
Turn off your computer’s power management feature before charging the mouse so that your computer
doesn’t enter sleep mode, which temporarily halts the charging process.
z
Place the receiver at least 8 inches (20 cm) away from all electrical devices, such as your monitor,
speakers or external storage devices.
z
If necessary, use the three-inch extension cable to keep the receiver away from the computer. Plug the
receiver into the extension cable, and the extension cable to the computer.
z
Avoid using the mouse on a metal surface. Metals, such as iron, aluminum or copper, shield the radio
frequency transmission and may slow down the mouse’s response time or cause the mouse to fail
temporarily.
z
The mouse will enter a suspend mode at the same time your computer does. To activate the mouse,
press any button.
z
If your computer has a metal case that contains aluminum or magnesium, use the mouse to the side.
The display panel may interfere with the radio frequency signal if you use the mouse directly in front of
the computer.
z
Never use the mouse on a glass or mirrored surface as these surfaces will cause the mouse to fail
temporarily.
z
To maximize battery life, use the mouse on a white, or light colored surface. Dark surfaces cause the
mouse’s light emitter diode (LED) light to glow brighter, which causes the battery to discharge more
rapidly.
Warranty
We warrant that product from its authorized distributor will meet the applicable product specifications and be
free from all defects in design, assembly, material and workmanship. Please contact ATake retailers, or visit
our website for more information about the product.