16"(406mm)
7/32"
(5.5mm)
2.5"(64mm)
CAUTION
:
To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on
to the next step.
Go to Step 3 on PAGE 7.
Center line
No!
Use a pencil to mark the center of the
second stud.
Use a pencil to mark the mounting holes
on the wall. Make sure the holes will be
in the center of the stud and are level.
Use 7/32” (5.5mm) drill bit to pre-drill holes at
least 2.5” inches (64mm) deep at the marked
locations.
Use the Lag Bolts (1) and Washers (2) to secure
the Wall Plate to the wall.
