CHARGING
To charge the headphones simply insert the micro USB end of the supplied cable into the USB
CHARGING PORT and the standard USB end into a USB port on a USB charger or computer.
The LED INDICATOR will turn Red when the headphones are charging.
The LED INDICATOR will turn Off when the headphones are fully charged.
POWER
To turn the headphones ON slide the POWER SWITCH down. The LED INDICATOR will
begin flashing Blue and the voice prompt will alert you the power is ON.
To turn the headphones OFF slide the POWER SWITCH up. The LED INDICATOR will turn
Off.
PAIRING TO YOUR BLUETOOTH DEVICE
1. Turn your Bluetooth device OFF entirely and then turn it back ON to refresh the
device’s Bluetooth memory.
2. Find the Bluetooth menu in your device and make sure the Bluetooth function is turned
ON (refer to your device’s user manual for instructions on finding the Bluetooth menu).
3. Turn the Headphones ON and unplug the headphone cable from the 3.5mm INPUT if
necessary.
4. On your device, perform a Bluetooth “device discovery” to add the A9HPBT as a new
device.
5. When the headphones are discovered your device will display “
A9HPBT
” in the
Bluetooth menu.
6. After selecting “
A9HPBT
” from the Bluetooth menu the LED indicator will slowly flash
Blue, and the voice prompt will announce that Bluetooth Pairing was successful.
7. If supported by your device’s menu, set the A9HPBT as “set as authorized” or “add to
trusted devices”
PLAYING MUSIC
After successfully pairing the headphones with your Bluetooth device, you can begin playing
music simply by choosing the song you wish to hear on your device’s menu system (refer to
your device’s user manual for instructions on playing music).
PLAYBACK & VOLUME CONTROLS
All playback controls (Play, Pause, Next/Previous song, etc.) can be controlled either directly
on your device, or on the buttons on the headphones.
