ATAGO 5010, Instruction Manual, Page: 21 / 27

-14-
6. Error Messages
The battery power is low. Not enough light could pass through
the sample solution to take the angle
of rotation measurement.
a
Dilute or filter the sample before
measuring.
An error has occurred while
adjusting the setting. Too much external light is interfering
with the measurement.
a
Shade the sample stage with
your
A hand and measure again.
*
This error message may also
appear if the sample temperature
is too low.
The sample measured above
the measurement range. Measurement error.
(When User scale is selected)
a
Press
J
and
K
to
A view the detail of the error.
The sample measured below
the measurement range.
(Example)
The sample measured below 3.9˚C
(16.9˚C in the Purity or ISS scale).
G
was pressed with
nothing or something other
than water on the sample
stage. (When Brix or User
scale is selected)
(Example)
The sample measured above
41.1˚C.
■
- 3.0 . 0
.. HHH
℃
- A . A . A
20.3
℃
■
- 3.0 . 0
.. LLL ℃
- L . L . L
20.3 ℃
- E . r . r
.. bAS
- H . H . H
20.3 ℃
- E . r . r
..LLL
- n . nn
.
- O . d .
..LLL
- L . o .A
℃