Atag WS90 FM Series, Instructions For Use Manual

Page: 38 / 44

EN 8
Cleaning
Before each servicing, first disconnect the cooker hood by unplugging from the
wall socket or by switching off the main switch of the residence. The hood must be
cleaned regularly, both inside as well as outside (with at least the same regularity
as used for cleaning the grease filters). Do not use any products that contain
abrasive materials. Do not use alcohol for cleaning!
If you do not follow these instructions with regard to cleaning the appliance and
cleaning or replacing the filters, this can lead to fire. It is essential to follow these
instructions! The manufacturer is not liable for damage to the motor or damage as
a result of fire that is due to improper servicing or not following the above safety
requirements.
Cooker hood
Clean the cooker hood with soapy water and a soft cloth. Then treat with clean water. Do not use
any aggressive cleaning agents such as soda.
The lacquer of the cooker hood will remain in good condition if you rub the lacquer with wax
once in a while.
Stainless steel hoods
Do not use scouring sponges or other abrasives on stainless steel hoods. Finish with a non-
abrasive, non-polishing agent and scrub in the direction of the brushing of the stainless steel.
Metal grease filters
Metal filters need to be cleaned once per month (or when indicated by the filter cleaning
indicator if present on the model) with neutral cleaning agents, by hand or in the dishwasher at
low temperatures using a short programme. Place the grease filter in the dishwasher with the
openings facing down so that water can run out. Aluminium grease filters will become dull from
the cleaning agents in the dishwasher. This is normal and does not affect the functioning of the
filters.
MAINTENANCE