How to fill the rinse aid
dispenser
A
B
C
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
1.
Open the lid (
C
).
2.
Fill the dispenser (
B
) until the rinse aid
reaches the marking ''MAX''.
3.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4.
Close the lid. Make sure that the lid
locks into position.
Fill the rinse aid dispenser when
the indicator (
A
) becomes clear.
DAILY USE
1.
Open the water tap.
2.
Press the on/off button to activate the
appliance.
Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent. If you use multi-
tablets, activate the option Multitab.
5.
Set and start the correct programme for
the type of load and the degree of soil.
Using the detergent
A
B
C
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1.
Press the release button (
A
) to open the
lid (
C
).
2.
Put the detergent, in powder or tablets,
in the compartment (
B
).
3.
If the programme has a prewash phase,
put a small quantity of detergent on the
inner part of the appliance door.
4.
Close the lid. Make sure that the lid
locks into position.
Setting and starting a
programme
The AUTO OFF function
This function decreases energy
consumption by deactivating automatically
the appliance when it is not operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
13
