Atag VA6011CF Instructions For Use Manual Download Page 7

32

8b. Setting and starting the 

programme with "delay start"

Once a programme and required options 
have been selected (see point 8a.) to use 
"delay start" proceed as follows:

Select the delay time by pressing the "delay 
start" 
push button; you can choose between 
3, 6, or 9 hours.

The corresponding indicator light will come on.

Le setting made previously will not be 
modified.

To set the time setting to zero press the 
"delay start" push button until the indicator 
lights of the hours turn off.

Press the "programme start" push button, un 
audible signal informs you that the countdown 
starts. The running of the countdown is 
emphasized by the indicator light of the hours 
that from fixed is now flashing.

The opening of the door will not stop the 
countdown.

Once the delayed time has elapsed the 
programme will start automatically.

To stop a countdown in progress without 
modifiying the other settings, press for about 3 
seconds the "programme start" push button.

9.

To cancel a programme in 
progress

To stop und undo a programme already 
running press and keep pressed for at least 3 
seconds the "programme start" push button.

An audible signal will inform you that the 
previous programme has been annuled and it 
is now possible to modify the settings and/or 
select a new washing programame.

10. At the end of the washing 

programme 

The dishwasher will automatically stop and 
an intermittent audible signal will sound when 
the programme has ended (with the delay 
start the audible signal is automatically 
excluded).

All indicator lights turn off except for the one 
corresponding to the programme that has just 
ended.

Switch off the dishwasher by pressing the 
On/Off push button and open the door.

Wait a few minutes before removing the 
dishes; in this way they will be cooler and the 
drying will be improved.

Empty the lower basket first and then the
upper one; this will avoid water dripping from 
the upper basket onto the dishes in the lower 
one.

Important!
In general it is not advisable to open the 
door while the machine is working; if the 
door is opened however, a safety device 
ensures that the machine stops.
Care must be taken if the door is opened 
during the hot phase or immediately 
after a programme has finished, as 
steam may escape. 

When the washing programme has 
finished, it is recommended that the 
dishwasher is unplugged and the water 
tap turned off.

Summary of Contents for VA6011CF












Reviews: