Atag KG6111P, Manual

Page: 35 / 40

GB 15
INSTALLATION INSTRUCTIONS
This appliance should only be connected up by a registered installer!
Please note
The type of gas and the country for which the appliance has been
designed are indicated on the application identification card.
This is a category 1 appliance.
Gas connection
The gas connection must comply with national and local
•
regulations.
We recommend that the hob be connected by means of a specially
•
designed safety hose.
Behind an oven use must be made of a pipe made entirely out of
•
metal.
Please note
A safety hose may not be bent and must not come into contact
•
with moving parts of kitchen units.
In all cases the connection tap for the appliance must be
•
positioned such that it is easily accessible.
Before using the appliance for the first time check the
•
connections using water and washing-up liquid to ensure
that there are no gas leaks.
Electrical connection
230 V - 50 Hz - 1,1W
The electrical connection must comply with national and local
•
regulations.
Wall socket and plug must be accessible at all times.
•
If you want to make a fixed connection, ensure that a multi-pole
•
switch with a distance between contacts of 3 mm is installed in
the supply cable.
Please note
This appliance must be earthed.
If the connecting cable is damaged, it may only be replaced by the
General