Atag HIDD8471LV, Instructions For Usage And Installation

Page: 44 / 116

Operation
44
GB
4.25 Use extraction system
The suction is located in the middle of the hob with the
extractor facing downwards.
IMPORTANT
Do not place the lid on the induction hob! Risk of burning!
4.25.1 Switching the fan on and off
1. Press the fan ON/OFF key (approx. 1 s.)
2. You will then be able to select a power setting, 1,2,3 or 4,
by using the Plus or Minus key . The symbol for the
fan will light up.
The intensive power setting P operates for 10 minutes,
after which the power level is automatically reduced to
power setting 4.
3. Press the fan Minus key until 0 is shown or press the
ON/Off key of the fan in order to switch fan off .
Hint
In order to ensure that extraction functions well with tall
cooking pots (e.g. pots used for cooking asparagus), you can
place a wooden spoon under the lid of the pot.
4.25.2 Adjustable after-run of the extraction system
The exhaust after-run is used after cooking to eliminate
cooking odours. The fi lters are also dried in the system.
Adjusting the after-run of the extraction system
1. Press simultaneously the extractor Plus key and Minus
key . The after-run of the extractor of 10 minutes will be
activated. The fan symbol and the decimal point blink.
2. Pressing the plus key will raise the time in 5-minutes
steps.
Pressing the minus key will lower the time in 5-minutes
steps.
3. Pressing simultaneously again the Plus- and Minus
key will start the settings; the display will go off . The
remaining run time and set fan speed is displayed for a
short time every 30 seconds.