Atag HIDD28471SV Instructions For Use Manual Download Page 12 | Manualshive

Page: 12 / 78

background image

Dear customer!

Please read the operating instructions before use. They include general tips, information about the
settings and adjustments you can make, and the best way to take care of your appliance.

The manual also serves as reference material for service technicians.

Please, therefore, stick the

appliance identification card in the space provided at the back of the manual

. The appliance

identification card contains all the information that the service technician will need in order to respond
appropriately to your needs and questions.

TIP!

You can find the most recent version of the instructions for use on our website.

Enjoy your cooking!

These instructions

These instructions are written for:

•

The user; to quickly become familiar and make optimal use of the appliance.

•

An installer; to install the appliance in accordance with the applicable standards.

The table below gives you information on the different chapters you can find in order in these
instructions.

Purpose

Page

Chapter

Explains the pictograms used in these instructions.

Pictograms used

Provides information, warnings and tips on using the appliance
safely so that you will not get hurt and the device will not
malfunction. Always read this section thoroughly before using
the appliance.

Describes the available functions of the appliance. The tables
clearly show what the different keys can be used for. The
various possible displays and messages on the appliance
are also explained.

Your hob with
integrated extractor

This chapter finds information on the operation and use of
induction and the exhaust module. You will also find advice
on the cookware to be used and information on cooking levels.

It gives you step-by-step information on how to operate the
device. The steps include illustrations that consist of a left-side
drawing showing the action (which key to touch) and a
right-side drawing showing the reaction of the device.

Refer to this section if you want to connect the appliance to
Wi-Fi in your home. It also describes how to use the

Connect

Life app and how to update the appliance firmware.

ConnectLife and Wi-Fi

You can fully customise this induction hob to your cooking
style! Several settings can be adjusted. This chapter also
contains settings for the installer.

Provides information on cleaning and maintaining your device.

12

Your hob with integrated extractor

«
...
10
11
12
13
14
...
»

Summary of Contents for HIDD28471SV















































































Reviews:

No comments

Related manuals for HIDD28471SV

Brand: Midea Pages: 24

Brand: Kalorik Pages: 24

SKALAN 005.234.19

Brand: IKEA Pages: 24

Brand: Candy Pages: 12

Brand: BORETTI Pages: 68

Brand: Siemens Pages: 28

Brand: Siemens Pages: 32

Brand: Siemens Pages: 36

Brand: Siemens Pages: 36

Brand: Innocenti Pages: 24

Brand: Blaupunkt Pages: 16

Brand: Blaupunkt Pages: 100

Brand: Edesa Pages: 8

Brand: Hansa Pages: 52

Brand: FULGOR Pages: 130

Brand: Gaggenau Pages: 8

Brand: Pkm Pages: 42

Brand: Fritel Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands