GB 20
General
INSTALLATION INSTRUCTIONS
Safety instructions for the installation
• Th
e connection must comply with national and local regulations.
• Th
e appliance must always be earthed.
•
Th
is appliance may only be connected by a competent electrical
installer.
•
For the connection, use an approved cable (for example type
HO7RR) in accordance with the regulations. Th
e cable casing
should be of rubber.
•
The connection cable must hang freely and is not to be fed
through a drawer.
•
If you want to make a fi xed connection, make sure that a multi-
polar switch with a contact separation of at least 3 mm is fi tted in
the supply line.
•
Th
e worktop the hob is built into must be fl at.
•
Th
e walls and the worktop surrounding the appliance must be
heat resistant up to at least 85 °C. Even though the appliance
itself does not get hot, the heat of the hot pan could discolour or
deform the wall.
•
Damage caused by incorrect connection, installation or use, will
not be covered by the guarantee
Clearance
Suffi
cient all-round clearance is essential to the safe use of the hob.
Check that there is enough clearance.
cooker hood
cabinet
side wall
hob
*
HI4271B: min. 61 cm
HI6271B: min. 61 cm
