39
fix the clips onto the hob
Installing your hob in complete safety
F
itting
A seal exists for preventing
any humidity getting under
the hob.
-Stick the seal under the rim
of the hob and lower the
hob into position on the
worktop.
-This seal is supplied in the
sachet; stick it in place
beneath the hob.
These hobs are delivered with type H 05 VVF power cable (1.5mm²) with 3/5 conductors (including a
green/yellow earth wire), which must be connected to the power supply via a plug that complies with
publication CEI 83 or an all-pole cut-out unit with contacts that open by at least 3mm.
If the cable is damaged, it must be replaced by the manufacturers, their After Sales Service or another
similarly qualified person for avoiding any possible risk of accident.
When the power is switched on, or after a long power failure, a light
code appears on the control panel. This disappears automatically after
about 30 seconds or as soon as any touch control is touched on the
panel. This is normal, as the display is for use by the after-sales service when required. The user must not
take this into account under any circumstances.
T
he unit must be installed so that the mains plug is easily
accessible.
C
onnection
dimensions in cm
- 220-240 V monophase
fuse : 16 amp
Green/yellow
Blue
Neutral
Earth
Phase
N
L
brown
4 mini
26,5
49
4 mini
4 m
ini
28,4
50,9
48,8
26,3
6,5
49
26,5
9962 9651_ML_A.qxd 27/06/03 13:33 Page 39