Electrical connection
This appliance is manufactured in class I; it must therefore be connected to the earth system.
Make sure the supply voltage ratings correspond with those stated on the appliance data plate.
The connection to the mains is carried out as follows:
•
BROWN = L phase
•
BLUE = N zero
•
YELLOW/GREEN = Earth
During the electrical connection, make sure that the electrical socket is equipped with an earth
connection.
This cooker hood has been provided with a power plug. When installing the hood, make sure that
this plug remains accessible.
WARNING!
If you want to make a fixed connection, ensure that an omnipolar switch with a contact separation
of at least 3 mm is fitted in the supply line.
Appliance dimensions
Island hoods
Wall hoods
26
Installation
Summary of Contents for ES10 MG
