Atag ES10 MG, Instructions For Use Manual

Page: 12 / 40

Making the connection between cooker hood and hob
To operate the cooker hood with the hob, you must make a connection between the hob and the
hood.
To make the connection, the Connection setup mode of the cooker hood and the hob must be
activated.
See also the manual for the hob. Check our website for the full range of hobs that can be connected
to your cooker hood.
1. The hood and lights must be switched off.
2. Touch and hold simultaneously the – (minus) key and the + (plus) key for 3 seconds.
• The lighting key, the + (plus) key, the – (minus) key and the timer key will flash simultaneously
for a maximum of 3 minutes.
3. On your hob, activate the pairing mode in the user menu (see the hob manual)
• The connection to the hob is established.
4. If the connection is successful, the cooker hood will return to standby.
NOTE!
When manually operating the hood in connection mode, the pairing will be lost and must be
paired again.
12
Operation