Atag CU12554TMM, Instructions For Use Manual

Page: 50 / 60

EN 8
Switch on boost setting
• Press and hold the ‘+’ key for at least 1 second.
The boost setting is switched on for 10 minutes. The speed level 4
indicator will flash during this period. The original extraction setting will
be reactivated after this period.
• Press and release the ‘-’ key to switch off the boost setting.
Note!
If the boost setting has been selected, the timer function cannot be activated.
Switching on the timer
• Press the timer key.
The timer indicator will start to blink.
The cooker hood will switch off automatically after 10 minutes.
• Switch off the timer function by pressing a random key (except the one
for lighting).
The cooker hood can be used in extraction mode or recirculation mode.
The air extraction capacity is adapted to the selected mode. The hood will
start up in the default extraction mode. Is has to be reset for recirculation
mode.
With an RMS kit (recirculation modification set) the air will first be cleaned
by the grease filters and then odours will be filtered by the charcoal filter.
The cleaned air is recirculated back into the kitchen.
Switching on recirculation mode
• When the light and fan are off, simultaneously hold the timer key and
the light key until the filter indicator flashes 3 times.
The carbon filter indicator is activated.
Switching off recirculation mode
• When the light and fan are off, simultaneously hold the timer key and
the light key until the filter indicator lights up for 3 seconds and then
turns off.
USE