Asystems DMA8413, User Manual

Page: 6 / 24

4
DMA8825 / DMA8813 / DMA8425 / DMA8413
REAR PANEL
1. AC Power Connector
The power inlet for connecting a standard IEC power
cable.
2. AES/EBU Connector
For connecting AES/EBU-enabled devices.
3. VGA Connector
4.
SD Card Slot
5. WCLK Connector
6.
USB Port
7. SPEAKER OUTPUTS (Amplified Output)
For connecting with passive loud speaker.
8. PERIPHERAL Connector
For connecting with ASYSTEMS’ RM6E programmable
remote control (sold separately).
9. PRESET RECALL Connector
For connecting with ASYSTEMS’ RM series remote
control�
10. REMOTE LEVEL CONTROL Connector
For connecting ASYSTEMS’ RM series remote control.
11. INPUT Connector
Two types of input connector offered - Euroblock and
balanced 14”TRS.
12. OUTPUT Connector
DMA8825/DMA8813/DMA845/DMA8413 adopts
3-pin Euroblock output connectors as the line-out
interface. Those connectors can be set as balanced or
unbalanced. (See section “Installation and Setup”).
13.
Digital I/O Expansion Card Slot
For installing ASYSTEM’s DT22/DT44/DT88 Dante
Networking card to enable DMA8825/DMA8813/
DMA845/DMA8413 as a networking portal to other
audio devices�
14. ETHERNET Connector
RJ-45 connector for connecting DMA8825/DMA8813/
DMA845/DMA8413 with PC or intranet�
DMA8825 , DMA8813 , DMA8425 and DMA8413 share the same I/O design and layout� Except that DMA8825/DMA8813
has 8 speaker output connectors and 8 line-out connectors, and DMA8425/DMA8413 has 4 speaker output connectors
and 4 line-out connectors.