Asycube - Asyril SA
Operating Manual
©
Copyright Asyril S.A.
Maintenance and reparation
v1.7
FO 32.03.118
Operating Manual
Asycube
- Asyril SA
36/41
Remove the platform module
4.3.2.
DANGER !
Be sure that the backlight is off
before
removing
the
platform
module. Failure to follow this
instruction may cause permanent
damage to the backlight.
Step 1
Put the tool
(A)
into the platform
specific hole
Push the tool to the side for
freeing the platform
(B)
Step 2
Take the platform module out
(C)
Release the tool
– the mechanism
goes to the initial position
Figure 4-1 : remove the platform
Exchange of the backlight
4.3.3.
DANGER !
Be sure that all power sources and other cables to the unit are disconnected before
changing the backlight.
Step 1
Remove the platform module
(A)
Refer to “4.3.2 Remove the
more information on how to
remove the platform.
Step 2
Unscrew the two screws needed to
create the electric contact
(B)
Step 3
Unscrew the other four screws
Step 4
Remove the backlight
(C)
Step 5
Place new backlight
Step 6
Screw the four screws
Step 7
Screw the two screws needed to
create the electric contact
Step 8
Remount the platform module
Figure 4-2 : exchange of the backlight
(C)
(B)
(A)
(A)
(B)
(C)
Summary of Contents for Asycube
Page 2: ......
