44
MAINTENANCE AND CARE
• Disconnect all power before servicing the treadmill
• Add a little mild detergent to the 100% cotton cloth. Do not spray the detergent directly on the wal-
king belt ore use acidic and corrosive detergent.
• Do not wipe under the walking belt.
• After a period of exercise, dust and stains may appear on the rear floor. This is normal - just wipe.
• Start the treadmill and run at a speed of 3 km/h.
• Walking belt to the left: Turn the left adjusting hole screw clockwise by 1/4 turn.
• Walking belt to the right: Turn the right adjusting hole screw clockwise by 1/4 turn.
• Walking belt slipping: Turn the left and right adjusting screws clockwise for 1/2 turn at the same
time.
• After each adjustment, it need to run for a period of time (1-2 minutes) to observe the correction.
Please adjust again if necessary.
• Power off the treadmill and unplug the power cord.
• Lift the edge of the walking belt and smear the inner surface with silicone oil.
• Start the treadmill to run at a speed of 3 km/h for 10-20 seconds.
• 5-10 ml of silicone oil is required for one lubrication. Excessive application may cause slipping and
affect normal use.
• Lubricate your walking belt every three months.
Clean the treadmill
Walking Belt Slipping and Correction
Walking belt lubrication
