50 / 69
ASSEMBLY INSTRUCTION
STEP 3
1
21
32
5
20
37
22
25
6
4
33
a) Attach the handlebar (5) to the front post (4) and fasten with one clamp (25), one allen bolt
(22), one clamp cover (37) and one T type knob (21).
b) Connect the upper sensor wire (33) to the sensor wire on the back of the meter (6).
c) Put the hand pulse wires (20) through the hole on the front post (4) and plug with one
grommet (32). Then connect the hand pulse wires (20) from front post (4) to the pulse wires
on the back of meter (6).
d) Attach the meter (6) to the front post (4) and fasten with four cross-head screws (27) which
are pre-assemble on the meter (6).
