Congratulations on your purchase of an ASV C/5 Sport Streetbike lever. The correct installation of control
levers on a sport/street motorcycle is critical. Incorrect installation or the installation of an incorrect part
can result in a malfunction of your clutch and / or front brake system. This lever should be installed by a
certified mechanic; preferably at your local motorcycle dealer service dept. ASV Inventions, Inc. accepts no
liability for malfunctions as a result of incorrect installation or the installation of a part that was not
designed specifically for your motorcycle. Please check the list below to confirm that the correct year, make
and model of your motorcycle is listed. If the correct year, make and model of your motorcycle is
not
listed
below, then this part is
not
the correct part for your motorcycle and must
not
be installed onto your
motorcycle.
ASV C/5 Sport front brake lever part number: BRC555 fits only the following motorcycles:
Please disregard any dashes or letters after this part number, (ex; BRC555-SK) Any dashes or letters
following your part number are for colors and/or length of the lever (Shorty) and do not affect the application
of the lever to the bike.
APRILIA
YEAR
PART#
RSV Mille/R
(99-03)
BRC555
Tuono/R
(03-07)
BRC555
Falco/SL1000
(00-04)
BRC555
DUCATI
YEAR
PART#
MS4/MS4R
(01-06)
BRC555
M900/M1000
(00-05)
BRC555
900SS /1000SS
(98-06)
BRC555
996/998B/S/R
(99-03)
BRC555
748/750SS
(99-02)
BRC555
MTS1000SDS/DS
(04-06)
BRC555
MTS1100/S
(07-08)
BRC555
ST4/S/ABS
(04-06)
BRC555
ST3/S/ABS
(03-07)
BRC555
Sport 1000
(06-08)
BRC555
GT 1000
(06-08)
BRC555
Paul Smart LE
(2006)
BRC555
Monster S2R 1000
(06-08)
BRC555
If your motorcycle is not on this list,
this part # BRC555 is not the
correct part for your Motorcycle.
For any questions regarding correct
application for your motorcycle,
please call ASV Inventions, Inc.,
toll free, at:
1-877-278-7000
Tools and supplies needed: 1) Flat Blade
Screwdriver, 1) 10mm wrench or socket
1
To remove your stock lever, use a
10mm wrench or socket to remove
the locknut attached to the main pivot
bolt that holds the lever. (Photo 1)
2
Once the locknut is removed,
unscrew the main pivot bolt with a
Flat blade screwdriver. After the pivot
bolt is removed, the lever will detach
from the master cylinder. (Photo 2) Be
sure to also remove the plunger rod from
the master cylinder that was inserted
into the barrel on the original lever.
1
See other side for further instructions
®
INSTALLATION INSTRUCTIONS FOR PART # BRC555
2
C/5 Sport Brake Lever Part# BRC555
INSTRUCTIONS_BRC555 3/21/08 9:35 AM Page 1
Text
(714) 861 1400 ext 123
