PL-X31M,PL-X32M User Manual
14
network name) appears in the device list.
Set All Devices
This button is used to change the logical network of all devices that appear in the
main panel. If these devices whose passwords have been entered for the same
logical network, a dialog box appears, indicating successful operation. For devices
whose passwords are not entered, a dialog box appears indicating operation failure.
5.3 Diagnostics Tab
The Diagnostics screen shows the system information and history of all remote
devices appeared over a period of time. See Figure 10.
The Upper panel shows technical data concerning software and hardware on the
host computer that are used to communicate through HomePlug on the power line
network. It includes the following:
Operating system platform/version
Host network name
User name
MAC address of all NICs (Network interface card) connected to the host
Identify versions of all Driver DLLs and Libraries used (NDIS) and optionally
HomePlug chipset manufacturer name (Turbo Only devices)
MAC Firmware Version (Turbo Only devices)
MAC addresses of all devices connected locally to the host
Version of the Configuration Utility
Vendor name
