3-25
Chapter 3: BIOS setup
Post Report [5 sec]
This item appears only when you set
Boot Logo Display
to [Disabled]. This item
allows you to select a desired post report waiting time. Configuration options: [1
sec] ~ [10 sec] [Until Press ESC].
3.7.3
Bootup NumLock State [On]
[On]
Sets the power-on state of the NumLock to [On].
[Off]
Sets the power-on state of the NumLock to [Off].
3.7.4
Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed
when error occurs. Configuration options: [Disabled] [Enabled]
3.7.5
Option ROM Messages [Force BIOS]
[Force BIOS] The third-party ROM messages will be forced to display during the
boot sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-
party manufacturer had set the add-on device to do so.
3.7.6
Interrupt 19 Capture [Disabled]
[Enabled]
Allows the option ROMs to trap Interrupt 19.
[Disabled]
Disables this function.
3.7.7
CSM (Compatibility Support Module)
Allows you to configure the CSM (Compatibility Support Module) items to fully
support the various VGA, bootable devices and add-on devices for better
compatibility.
Launch CSM [Enabled]
[Auto]
The system automatically detects the bootable devices and the
add-on devices.
[Enabled]
For better compatibility, enable the CSM to fully support the non-
UEFI driver add-on devices or the Windows
®
UEFI mode.
[Disabled]
Disable the CSM to fully support the Windows
®
Security Update
and Security Boot.
The following four items appear when you set Launch CSM to [Enabled].
Boot Devices Control [UEFI and L...]
Allows you to select the type of devices that you want to boot up. Configuration
options: [UEFI and Legacy OPROM] [Legacy OPROM only] [UEFI only]
