H310I-IM-B
2-24
19. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports HD Audio standard. Connect one end of the front panel audio I/O
module cable to this connector.
IMPORTANT!
• We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard’s high-definition audio
capability.
• If you want to connect a high-definition front panel audio module to this
connector, set the HD Audio Controller item in the BIOS setup to [Enabled].
H310I-IM-B Front panel audio connector
AAFP
PIN 1
GND NC A_JD_FMIC1
A_JD_HPOUTC1
A_FMIC1_L A_FMIC1_R A_HPOUT_R
A_JD_FRONT A_HPOUT_L
Connector type
HEADER 2x5p, K8, 2.54mm pitch
18.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF)
port. Connect the S/PDIF Out module cable to this connector, then install the
module to a slot opening at the back of the system chassis.
H310I-IM-B SPDIF connector
GND
SPDIFO
+5V
SPDIF_OUT
PIN 1
NOTE:
The SPDIF Out module is purchased separately.
Connector type
HEADER 1x4p, K2, 2.54mm pitch
