background image

The highest FCC SAR values for the device are as 

follows:
• 

0.72 W/Kg @1g(Head)

• 

1.19 W/Kg @1g(Body)

The FCC has granted an Equipment Authorization 

for this device with all reported SAR levels evaluated 

as in compliance with the FCC RF exposure 

guidelines. SAR information on this device is on file 

with the FCC and can be found under the Display 

Grant section of www.fcc.gov/oet/ea/fccid after 

searching on FCC ID: MSQX00PD.

Canada, Industry Canada (IC) 
Notices

This device complies with Industry Canada’s 

licence-exempt RSS standard(s). Operation is 

subject to the following two conditions:
(1)  This device may not cause interference; and
(2)  This device must accept any interference, 

including interference that may cause 

undesired operation of the device.

Le présent appareil est conforme aux normes CNR 

d’Industrie Canada applicables aux appareils radio 

exempts de licence. Son utilisation est sujette aux 

deux conditions suivantes : 
(1)   Cet appareil ne doit pas créer d’interférences 

nuisibles, et

(2)   Cet appareil doit tolérer tout type 

d’interférences, y compris celles susceptibles 

de provoquer un fonctionnement non souhaité 

de l’appareil.

Summary of Contents for Zenfone Max M1























Reviews: