Asus Z9PR-D16 Manual Download Page 173

Page: 173 / 194

ASUS Z9PR-D16

6-21

6.4

VGA driver installation

This section provides the instructions on how to install the ASPEED Video

Graphics Adapter (VGA) driver.
You need to manually install the ASPEED VGA driver on a Windows

operating

system.
To install the ASPEED VGA driver:
1. Restart the computer, and then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run the support DVD.

3. Click the

ASPEED AST2300 Display Driver

to begin installation.

4. When the

ASPEED Graphics

installation wizard appears, click

Next

to start

the installation.

Summary of Contents for Z9PR-D16



































































































































































































Search results

Summary of Contents for Z9PR-D16

Reviews:

Related manuals for Z9PR-D16

Brands by name

Popular brands

Asus Z9PR-D16, Manual

Search results

Summary of Contents for Z9PR-D16

Reviews:

Related manuals for Z9PR-D16

Brands by name

Popular brands