Asus Z9PH-D16 FDR User Manual Download Page 164

Page: 164 / 192

6-18

Chapter 6: Driver installation

6.3

Intel

Network Connections Software

installation

This section provides the instructions on how to install the Intel

Network

Connections Software on the system.
You need to manually install the Intel

Network Connections Software on a

Windows

operating system. To install the Intel

Network Connections Software:

1. Restart the computer, and then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

• Windows

automatically detects the LAN controllers and displays a New

Hardware Found window. Click

Cancel

to close this window.

• If Autorun is NOT enabled in your computer, browse the contents of the

support DVD to locate the file

ASSETUP.EXE

from the

BIN

folder. Double-

click the

ASSETUP.EXE

to run the DVD.

3. Click the

Intel

Network Connections Software

to begin installation.

4. Click

Install Drivers and Software

option to begin installation.

Summary of Contents for Z9PH-D16 FDR

































































































































































































Search results

Summary of Contents for Z9PH-D16 FDR

Reviews:

Related manuals for Z9PH-D16 FDR

Brands by name

Popular brands

Asus Z9PH-D16 FDR, User Manual

Search results

Summary of Contents for Z9PH-D16 FDR

Reviews:

Related manuals for Z9PH-D16 FDR

Brands by name

Popular brands